Features and Usage of Open Cell Ceiling

Features and Usage of Open Cell Ceiling

Open cell ceiling systems are composed of two primary components: the suspended ceiling and the base that is affixed to the ceiling via a suspended decorative plane. The minimum space needed for the installation of these systems is approximately ten centimeters. This aspect must be considered, as it will result in a noticeable reduction in the room's height.

Advantages of Open Cell Ceiling Solution

The front surface is composed of intersecting rails with a unique design, creating a lattice structure at the top. This design not only enhances the aesthetic appeal but also facilitates air circulation. As a result, the ventilation system outlets can be positioned above the floor in a discreet area, maintaining a clean visual appearance.

Application areas of Open Ceiling, Features and Usage of Open Cell Ceiling

The primary application for these solutions is found in various commercial environments. Mesh linings are ideal for enhancing the aesthetics of commercial spaces, including restaurants, cafes, and office areas. Nevertheless, these solutions can also be utilized for residential finishing.

The only constraint regarding the installation of such ceilings is the height of the walls. If the height is below two and a half meters, it is advisable to avoid using suspended structures. This is because it can create an uncomfortable atmosphere in the room, and any utilities located above the floor will be visible from below.

For those seeking variety, an open ceiling with a ceiling design presents an excellent alternative. Open ceilings are advantageous as they effectively conceal imperfections in the main ceiling with minimal effort. This article will explore the various types, techniques, and installation features of open grid ceilings.

Features and Usage of Open Grid Ceiling

An aluminum profile shaped like the letter U is primarily utilized, with a thickness ranging from 0.5 to 1 cm and a height between 3 to 5 cm.

By employing profiles of varying heights, a suspended ceiling effect is created. This approach not only enhances the aesthetic appeal but also conceals all overhead utilities effectively.

The transparency of the open grid ceiling depends on:

The dimensions of the cells range from 3x3 cm to 20x20 cm, along with the intensity of light and the space between the ceiling and the profile.

In cases where the ceiling height is relatively low, it is advisable to opt for smaller cell sizes, a taller profile, and increased ceiling lighting.

The main advantages of installing the open grid ceiling are:

The open grid ceiling effectively conceals all essential systems, including electrical wiring and ventilation, while also serving an aesthetic purpose.

It contributes to a reduction in noise levels generated by the ventilation system associated with open ceilings.

The aluminum structure boasts high durability; contemporary Honeycomb ceilings are crafted from premium aluminum that maintains its color, exhibits anti-corrosive and frost-resistant properties, and withstands ultraviolet rays and moisture.

Should a specific section of the open cell ceiling sustain damage, replacing or repairing it incurs minimal financial and physical effort.

The Honeycomb ceiling complements various ceiling types, making the Open ceiling an excellent choice for enhancing any interior design.

Manufacturers of open ceilings avoid the use of toxic substances, ensuring that these structures are safe for human health.

Open ceilings facilitate easier access to the space between the ceiling and the roof for technical maintenance.

Additionally, open ceilings effectively conceal fire safety systems, and even when the system is activated, the aluminum profile remains protected from water damage due to its specialized anti-corrosion treatment.

Instructions for installing the open cell ceiling:

1. Begin by using a level and pencil to create a mark on the ceiling. Choose a wall to establish the initial point for subsequent installation tasks.

2. Ensure that the selected starting point allows the Open cell ceiling to be affixed to the main ceiling, effectively concealing the entire ceiling and any irregularities.

3. When determining the mark, it is essential to create three additional marks that will intersect a line connecting the room's perimeter to the adjacent walls. During the installation of the wall corners, the height for the future Open cell ceiling should be established. Secure the corners using self-tapping screws and dowels.

4. Install the guides along the connecting line. Once the guides are secured, the ceiling will resemble attached shelves, with the front edge of the shelf oriented downward.

5. Select screws appropriate for the material of the main ceiling to ensure a secure installation. Maintain a maximum spacing of 45 cm between screws.

6. After securing the main guides, move on to marking the installation points for the guide profile.

7. To ensure the profile is firmly attached, create markings based on the cell size before proceeding with the profile installation.

8. Attach the profile to the rails and ceiling using hangers, ensuring that the maximum distance between suspension points does not exceed 1.2 m.

9. Assemble the system that will later support the mounting of the cells.

Open Grid Ceiling Installation Technology, Features and Usage of Open Cell Ceiling

The bed rails are available in lengths of 180 cm or 240 cm. Once you have determined the dimensions of the ceiling, you can decide on the optimal installation method for the guide. To minimize material usage, divide the room's length and width by the guide's length.

After positioning the suspensions and guides, proceed to drill holes for securing them.

Identify the locations for light sources and drill the necessary holes.

To accurately determine the number of suspensions needed for lighting installation, follow these guidelines:

Each lamp typically requires two or three suspensions.

For securing the guides, the number of suspensions needed varies with the roof length: if the rail measures 240 cm, three suspensions are necessary; if the rail is 120 cm, three suspensions are also required; and for rails not exceeding 60 cm, one or two suspensions will suffice.

The assembly of the main rails should be done with the shortest rails first. Connect the guides using specialized fasteners. Frame fixtures should be installed after the assembly is complete. Ensure that lamps are securely attached to the suspensions. Once the aluminum frame is in place, verify the ceiling's flatness with a level, and then connect and test the lighting.

Open grid ceiling lighting system

To enhance the illumination of open cell ceilings, raster-type lamps are utilized, as they represent the most appropriate lighting solution for this ceiling style.

These specialized luminaires are designed for ease of use and compatibility, ensuring that their dimensions perfectly match the size of the open grid ceiling cells. The presence of the GB mark on the luminaire signifies that it is intended for complete installation within the cells of the open cell ceiling.

The installation of these fixtures can occur at any height, depending on the positioning of the cells. The lamps are mounted directly onto suspensions. Opting for a chrome or metallic profile color can visually expand the space by enhancing light reflection. The installation of luminaires can be executed in any cell of the ceiling, facilitating the arrangement of either main or zoned lighting without difficulty.

In addition to raster-type lamps, other lighting options such as spotlights, fluorescent, halogen, or LED fixtures can also be employed for open cell ceilings. These lamps can be either built-in or suspended. The selection of a luminaire is influenced by factors such as the building type, ceiling functionality, aluminum profile color, and the overall interior design.